Alcatel-Lucent OmniSwitch 6450 Management Manual page 228

DHCP Client Preference to OXO DHCP Server
• If the first DHCPACK is received after 30 secs window, i.e. DHCPACK is received while DHCP client
is created on VLAN 127, this response gets applied immediately without waiting for OXO DHCP
response.
• If any VLAN ID is received from LLDP in this 30 secs window and response from OXO DHCP is not
received then DHCP client on VLAN 1 or on VLAN 127 is deleted and DHCP client gets created on
management VLAN received from LLDP. In this case if any DHCPACK response is stored to apply
after 30 secs window then this response will be ignored.
Note. The OXO DHCP should be active and connected to the switch during boot up for first load.
The Remote Configuration Load process may be delayed for at least 30 secs if no OXO response is
found within 30 secs.
page 8-20
Managing Automatic Remote Configuration Download
OmniSwitch 6250/6450 Switch Management Guide June 2013