Replacing The Fuser Oil Bottle - NEC Super Script 4400 Maintenance Manual

R
EPLACING THE
Part number 20-212
1. Turn the printer off and allow it to cool (A).
WARNING! The Fuser unit area may be very hot.
2. Open the Top Cover (B).
3. Open the Lock Tabs (C).
4. Remove the used Fuser Oil bottle and discard it (D).
note:
Hold a piece of paper under the used Fuser Oil Bottle while removing it to avoid drips in the printer.
5. Insert the new Fuser Oil bottle, cap side down. Make sure the tab of the bottle is on the right (E).
6. Close the Lock Tabs and the Top Cover (F).
7.Reset the Operator Panel to make sure the consumables usage information is current. See
page xx
A
D
106 SuperScript 4400 — Maintenance Guide
F O B
USER IL OTTLE
B
E
C
F