NEC Super Script 4400 Maintenance Manual page 91

N W 3.
ET ARE X
Complete these basic tasks to configure NetWare 3.x bindery-based services for your printer.
1. Log in to NetWare 3.x with Administrator rights and start PCONSOLE.
2. Define the Print Queue.
a. Select Print Queue Information from the Available Options menu and press
b. Press , type a name for the new queue to be serviced by the NIC and press
INSERT
return to the Available Options Menu.
3. Define the Print Server.
a. Select Print Server Information from the Available Options menu and press
b. Press , type the NIC Print Server Name and press
INSERT
note:
The Print Server Name you enter should match the name shown on the Network Settings page under
Novell Network Information.
4. Define the Printer.
a. Press with the new Print Server Highlighted, select Print Server Configuration and press
ENTER
then select Printer Configuration and press
b. In the Configured Printers list, select an unused printer number and press
Configuration screen, define a new name for the printer if desired. (The printer name is displayed in
various NetWare printing messages.)
c. Press to exit and select Yes to save the changes. Press
ESCAPE
Configuration menu.
82 SuperScript 4400 — Maintenance Guide
.
ENTER
.
ENTER
ESCAPE
.
ENTER
. Press
ENTER
.
ENTER
. In the Printer <#>
ENTER
again to return to the Printer Server
to
ESCAPE
,
ENTER