Adding The Paper Tray 2 Unit - NEC Super Script 4400 Maintenance Manual

A P
DDING THE APER
Part #4005
1. Make sure the printer is turned off and disconnected.
2. Make sure there is plenty of room around and above the printer to work. Find the packet of brackets and
thumb screws and set aside.
3. Remove the optional Paper Tray 2 unit from its packaging. Remove the .75"x 2" connector cable cover from the
unit. Extent the Connector Cable away from the unit.
4. Set the Paper Tray 2 unit next to the printer. Carefully align the Paper Tray 2 unit to the printer. Keeping the
printer level, lift the printer up and onto the Paper Tray 2 Unit as shown (A).
Adding Paper Tray 2 Unit
A
Adding Paper Tray 2 will increase
the printer's height by 4 inches
T 2 U
RAY NIT
B
Connector Cable
Screw Hole
C

Adding the Paper Tray 2 Unit

57