Operator Panel Menus - NEC Super Script 4400 Maintenance Manual

Operator Panel Menus

The Operator Panel has the seven main menus, described below (Default selections for each setting are marked
with an asterisk (*).
Control Menu
Use this menu to cancel the current print job or reset the printer when the printer is in an error state. Selecting
restarts the printer and causes it to reinitialize and perform a self-test.
RESET PRINTER
reset the network interface parameters without rebooting.
CONTROL
RESET PRINTER
RESET NIC
Setup Menu
Use this menu to configure the default settings for jobs that are not sent using printer driver software, or restore the
factory default settings. The
menu allows you to set printer operation settings. Select
MISCELLANEOUS
settings to their factory defaults (except communications parameters).
SETUP
JOB DEFAULTS
RESOLUTION**
EDGE SMOOTHING
COPIES
MISCELLANEOUS
POWER SAVE
JAM RECOVERY
MEMORY
RESTORE DEFAULTS
CONFIRM
PARAMETERS*
submenu allows you to set the appearance of print jobs. The
JOB DEFAULTS
600 x 600* / 1200 x 1200
ENABLE* / DISABLE
1* to 999
NEVER, 30 MIN., 1HOUR*,
1.5HOURS, 2HOURS, 3HOURS
NO / YES*
32MB, 40MB, 48MB, 64MB,
72MB, 80MB, 96MB, 128MB
allows you to
RESET NIC
to return printer
RESTORE DEFAULTS
Using the Menu Tree 31