Setting The Printer Ip Address - NEC Super Script 4400 Maintenance Manual

Setting The Printer IP Address

To take advantage of many of the network printer features, you must assign an IP address to the printer network
interface card. There are several ways to do this.
Using the Operator Panel to set the IP Address
You can use the operator panel to enable and set up the TCP/IP networking parameters for the printer. This is
particularly useful for setting the network IP address so you can use it as the printer's URL in web-based printing.
Follow these steps.
1. Press the Online button of the Operator Panel.
2. Press the Menu button to enter menu mode.
3. Press the Next button until
4. Press the Next button until
5. Press the Next button until
6. Press the Next button until
7. Use the Operator Panel buttons to set values for each of the 12 digits in this manner.
First press Next to set the curser to the first digit.
For the first digit, press Select to increment to the correct value. Then press Next to move to the next digit and
press Select to increment to its correct value. Continue until all twelve digits are set. When the final digit is set,
press Next to confirm the Net Address you set and then press Select.
8. Press Menu to exit menu mode and press Online to bring the printer online.
To validate any changes to network settings, you must turn the printer off, and then on again.
66 SuperScript 4400 — Maintenance Guide
OFFLINE
CONTROL
appears on the display, and press the Select button.
COMMUNICATIONS
appears on the display, and press the Select button.
NETWORK
appears on the display, and press the Select button.
TCP/IP
appears on the display, and press the Select button.
NET ADDRESS
appears on the display.
appears on the display.