NEC Super Script 4400 Maintenance Manual page 285

15. Reinstall the Oil Bottle (J).Close the Lock Tabs (K) and Top Cover.
16. Plug the printer in and turn the power on. Check to make sure no error messages are showing up on the
Operator Panel.
F
I
S
HIPPING THE
To ship your printer long distance, follow steps 1 —10 under "Moving Your Printer Locally" on page xx. Then
proceed with the next instructions.
note:
If you are returning the printer for service, you do not need to return the Power Cord, Toner Modules, Belt
Cartridge, Oil Bottle, or Cleaning Roller.
1. Make sure the Lock Levers are in the closed position holding the Cleaning Roller in place (A). Make sure Oil
Bottle is out.
2. Install the Fuser Roller shipping restraints removed when you unpacked your printer. Open the Release Levers
and insert them at each end of the fuser as shown (B).
note:
If you need replacement packaging call NEC Customer Service at 800-632-4650
3. Open the Front Cover and remove the Toner Modules (C).
4. Repack the Toner Modules in their original packaging.
5. Flip up the Belt Module Locking Levers (D).
6. Remove the Belt Cartridge (E) and wrap it in its original black wrapper or a suitable black cloth (F)
XII SuperScript 4400 — Maintenance Guide
G
J
It takes two adults to move this printer!
P
RINTER
H
K