Installing The Toner Modules - NEC Super Script 4400 Maintenance Manual

I
NSTALLING THE
1. Open the Front Cover of the printer(A).
2. Note the color labels inside indicating where to place the different color Toner Modules (B) (C=Cyan,
M=Magenta, Y=Yellow, and K=Black).
3. Begin with Cyan. Remove the Toner Module from its plastic bag and rock it gently three or four times (C).
4. Remove the protective tape from the module.
5. Remove (and save) the orange protective cover.
6. Hold the module level and slide into place along the guides in the printer (D).
7. Repeat steps 3 through 6 for the remaining color Toner Modules (E).
8. Close the Front Cover, making sure it clicks into place (F).
A
C
E
12 SuperScript 4400 — Maintenance Guide
T M
ONER ODULES
B
D
F
K (Black)
Y (Yellow)
M (Magenta)
C (Cyan)