Table of Contents
Advertisement
7 .6.6 Paper Exit Roller
Tools
Phillips Screwdriver #1, #2
Disassembly Procedures
1.
Remove the paper exit unit. (See the item 7.1.5.)
2.
Remove the paper exit cover. (See the item 7.1.5.)
3.
Remove the C ring of both sides (left and right).
4.
Remove the shaft support at the both sides.
5.
Remove the paper exit roller from the frame.
Assembly Procedures
1.
Put a new paper exit roller through the frame's hole.
2.
Install the shaft support of both sides (left and right).
3.
Install the C ring of both sides to the groove of paper exit roller.
Replacement Procedures for Maintenance Parts
189
Advertisement
Chapters
Table of Contents
