Replacing The Toner Module - NEC 870 - SuperScript B/W Laser Printer Online User's Manual

Chapter 8: Maintaining Your Printer
If the output quality has improved, continue
using the Toner module. When it begins to get too
light again, it is time to replace the Toner module
and/or the Photoconductor module.

Replacing the Toner Module

You should replace the Toner module when you
see print quality problems, such as light images or
white streaks across the page. To reorder an NEC
SuperScript 870 Toner module, contact your NEC
printer dealer or call 1-800-632-2326.
1. Turn OFF the printer, press the Top cover
release button and open the Top cover.
2. Remove the used Toner module from the
printer.
98
3. Remove the new Toner module from the
shipping carton and the foil wrapper. Save the
foil wrapper (you will want to recycle it with
your used Toner module). Simply put your
used Toner module into your new NEC
SuperScript 870 Toner module box and apply
the provided mailing label.
4. Rock the Toner module gently five or six times
to redistribute the toner.