Netware 3.X - NEC Super Script 4400 Maintenance Manual

5. Assign the Print Queue.
a. Select Queues Serviced By Printer and press
list and press
ENTER
b. Press to display the Available Queues list. Select the desired queue and press
INSERT
Priority level (recommended choice is 1) and press
c. Press to exit PCONSOLE.
Alt-F10
6. Confirm Successful Configuration.
a. Turn the printer off and on and wait for a Network Settings page to print. If the network is large, this may
take several minutes.
b. The Novell Connection Information area on the Network Settings page displays the printer name, file
server, queue, etc. If it displays Attached: Yes, this confirms that the NIC Print Server is ready to accept
print jobs. If not, verify that the Print Server name matches exactly the Print Server name that was entered
in PCONSOLE.
7. Install and Configure Your Printer Driver
In Windows, use the Add Printer feature to install and configure a SuperScript 4400 printer driver in each
workstation that will access the network printer.
note:
SuperScript 4400 printer drivers are on the Solutions CD that comes with the printer.
Specify that the printer will be attached as a Network Printer, and set the Port to the printer queue you just
created. (The Windows NT 4.0 driver installs automatically to LPT1:. After installation, you can manually reset the
port to your NetWare queue.)
.
. Highlight the desired printer on the Defined Printers
ENTER
.
ENTER
. Assign a
ENTER

NetWare 3.x

83