7.6 Replacement of Rollers and the Drum
7 .6.1 Transfer Unit
Tools
Phillips Screwdriver #1
Disassembly Procedures
1.
Remove the set screw ST3 6 (1 pc.) of transfer unit metal stop.
2.
Open the front cover unit.
3.
Remove the support shaft from the installation hole of frame.
4.
Remove the transfer unit.
Assembly Procedures
1.
Have a new transfer unit meet the installation hole of base.
2.
Install the transfer unit fixing metal.
Replacement Procedures for Maintenance Parts
Transfer Unit
Metal Stop
181