Printing A Test Page - NEC Super Script 4400 Maintenance Manual

P T
RINTING A EST
Follow these steps to connect your printer to AC Power and print a test page.
1. Make sure the power switch is turned off (button is out).
2. Connect the Power Cord to the rear of the printer.
3. Plug the other end of the Power Cord into a properly grounded outlet.
WARNING! This printer is intended to be electrically grounded. It comes with a three-wire grounding plug.
This plug will only fit a grounded AC outlet or power strip. This is a safety feature. If you are unable to insert the
plug into the outlet, contact a licensed electrician to replace the outlet with a properly grounded outlet. Do not
defeat the purpose of the grounding plug by removing the third pin!
4. Turn on the printer power.
5. Indicator lights cycle and the following messages appear on the Operator Panel display in sequence.
Self Test
SuperScript 4400 booting...
INITIALIZING
WARMING UP
PRINTING
6. The printer issues the test page and the following message appears on the Operator Panel display.
READY
A
14 SuperScript 4400 — Maintenance Guide
P
AGE
B
C
Power Warning Online
Menu OnLine
Data OHT Label
Feed Item Media
Previous Next Select