Replacing The Toner Modules - NEC Super Script 4400 Maintenance Manual

Color laser printer
Table of Contents

Advertisement

R
EPLACING THE TONER
Replace each Toner Module when you start seeing print quality problems such as light images or white streaks
across the page. The Operator Panel will display an alert message when the toner level is getting low.
To order an NEC SuperScript 4400 Toner Module contact your NEC printer dealer or call 1-800-NEC-INFO. The
black replacement modules print approximately 10,000 pages. The yellow, magenta, and cyan replacement
modules print approximately 6,000 pages each.
Follow these directions to replace the Toner Modules;
1.
Open the Front Cover
2.
Pull out the Toner Module(s) that needs replacing
3.
Hold the Toner Module horizontally and rock it left to right three or four times. Then remove the protective
orange cover and tape.
4.
Insert the Toner Modules into its corresponding slot and close the printer.
5.
Reset the Operator Panel to make sure the consumables usage information is current.
M
ODULES

Replacing the toner Modules

105

Advertisement

Table of Contents
loading

This manual is also suitable for:

Super script 4400n

Table of Contents