Table of Contents
Advertisement
7 .2.7 Erase Lamp
Tools
Phillips Screwdriver #1, #2
Disassembly Procedures
1.
Remove the drum cleaner assembly. (See the item 7.6.3.)
2.
Disconnect the harness connectors connected to the
erase lamp.
3.
Remove the erase lamp from the holder.
Assembly Procedures
1.
Install a new erase lamp.
2.
Install the erase lamp to the base frame.
3.
After the above , follow exactly the reverse order of
disassembling procedures.
4.
Upon completion of the installation, connect the power
supply cable.
5.
Turn the power supply switch ON.
6.
Execute the test print in Service Mode.
7.
Confirm the operation and print quality.
142
SuperScript 4400 — Maintenance Guide
Holder
Erase Lamp
Connector
Advertisement
Chapters
Table of Contents
