Safety Instructions; Selecting A Location - NEC Super Script 4400 Maintenance Manual

S I
AFETY NSTRUCTIONS
To protect yourself and your equipment from possible damage, always follow these precautions.
• Keep liquids away from the printer and protect the printer from dampness or spills.
• Save the printer box and all packing materials that came with your printer in case you need to ship it later.
• Lifting or moving the printer requires two adults!
• Keep the printer level at all times, especially when the Fuser Oil Bottle is installed. Do not tilt more than 1.5°!
• The fuser area, under the Top and Back Covers is very hot. Let the printer cool at least 15 minutes before
touching these areas.
• Read the installation instructions carefully before you plug in your printer, and follow all warnings.
Safety Precautions
The printer and packaging weighs approximately 100lbs.
Moving and unpacking the printer requires two adults.
WARNING! This printer is intended to be electrically grounded. It comes with a three-wire grounding plug.
This plug will only fit a grounded AC outlet or power strip. This is a safety feature. If you are unable to insert the
plug into the outlet, contact a licensed electrician to replace the outlet with a properly grounded outlet. Do not
defeat the purpose of the grounding plug by removing the third pin!
S L
ELECTING A OCATION
Select a level, stable place with adequate space for air circulation and opening covers and trays. The area should be
well ventilated and away from direct sunlight or sources of heat, cold, and humidity.
note:
For more details on printer dimensions and space requirements see Appendix A, Printer Specifications.
10"
13"
Keep printers vents
unobstructed
10"

Safety Instructions

5