Table of Contents
Advertisement
Message
Line 1:
PAPER MISMATCH
Line 2:
LOAD COM-10 TRAY
Line 1:
PAPER MISMATCH
Line 2:
LOAD DL TRAY
Line 1:
K-TONER EMPTY
Line 2:
Line 1:
Y-TONER EMPTY
Line 2:
Line 1:
M-TONER EMPTY
Line 2:
Line 1:
C-TONER EMPTY
Line 2:
Line 1:
K-TONER
Line 2:
NOT FOUND
Line 1:
Y-TONER
Line 2:
NOT FOUND
Line 1:
M-TONER
Line 2:
NOT FOUND
Line 1:
C-TONER
Line 2:
NOT FOUND
Line 1:
PAPER JAM
Line 2:
DRUM
Line 1:
PAPER JAM
Line 2:
INNER/DRUM
Line 1:
PAPER JAM
Line 2:
EXIT/DRUM
Line 1:
MISFEED
Line 2:
Line 1:
CHECK WASTE
Line 2:
TONER
Line 1:
REPLACE FUSER
Line 2:
OIL
Line 1:
REPLACE FUSER
Line 2:
ROLLER
Line 1:
MISPRINT
Line 2:
HW FAULT
Line 1:
BELT CARTRIDGE
Line 2:
NOT FOUND
Line 1:
FUSER UNIT
Line 2:
NOT FOUND
Line 1:
FUSER ROLLER
Line 2:
NOT FOUND
Line 1:
FRONT COVER OPEN
Line 2:
Line 1:
BACK COVER OPEN
Line 2:
14
Superscript 4200N and 4400 Series Maintenance Guide — Addendum
Explanation
Paper tray has papers but not the right type.
Paper tray has papers but not the right type.
Black toner cartridge is empty
Yellow toner cartridge is empty.
Magenta toner cartridge is empty.
Cyan toner cartridge is empty.
Black toner cartridge is not installed or installed incorrectly.
Yellow toner cartridge is not installed or installed incorrectly.
Magenta toner cartridge is not installed or installed incorrectly.
Cyan toner cartridge is not installed or installed incorrectly.
Paper jam in drum area.
Paper jam in inner area.
Paper jam in exit tray.
Paper misfeed.
Waste toner bottle is full or is not installed.
Fuser oil runs out.
Fuser cleaning roller reaches end-of-life.
Printing error caused by no PRREQ-N within a page.
OPC belt cartridge is not installed.
Fuser unit is not installed.
Fuser cleaning roller is not installed.
Front panel is open.
Back panel (transfer unit) is open.
Advertisement
Chapters
Table of Contents
