Latched Mode - EWM PHOENIX 301 EXPERT forceArc Operating Instructions Manual

Functional characteristics
TIG welding
5.3.5.4

Latched mode

I
Selection
• Select latched operating mode
Step 1
• Press and hold torch trigger
• Shielding gas is expelled (gas pre-flows)
The arc is ignited using liftarc.
• Welding current flows with pre-selected setting.
Step 2
• Release torch trigger (no effect)
Step 3
• Press torch trigger (no effect)
Step 4
• Release torch trigger
• Arc is extinguished.
• Gas post-flow time elapses.
74
1.
.
2. 3.
P
A
Figure 5-34
4.
t
t
Item No.: 099-004833-EWM01