Antistick - EWM PHOENIX 301 EXPERT forceArc Operating Instructions Manual

5.4.6

Antistick

Control element Action
V
A
M
Job Nr
Hold
Basic parameters
Display
Ihot
thot
tanti
Item No.: 099-004833-EWM01
Result
Select Program sequence mode
1 x
Select the welding parameters using the key
x x
buttons
Adjust the selected welding parameter using the
x x
key buttons
Machine returns to Display mode
3 x
Meaning / explanation
Hotstart current
Hotstart time
Antistick time
Functional characteristics
Anti-stick prevents the electrode from annealing.
If the electrode sticks in spite of the Arcforce device, the
machine automatically switches over to the minimum
current within about 1 second to prevent the electrode
from overheating. Check the welding current setting
and correct according to the welding task!
"Up" and "Down" (left)
"Up" and "Down" (right)
MMA welding
Display
Program Steps
Setting range
0% to 200%
0s to 10.0s
0s to 2.0s
79