Provisioning Mlpp Parameters - AudioCodes Mediant 3000 User Manual

5.8

Provisioning MLPP Parameters

This section describes how to configure the MLPP (Multi-Level Precedence and
Preemption) parameters using the EMS.
To configure the MLPP parameters:
1. In the MG Tree, select the device.
2. Double-click the desired Media Gateway; the Status screen is displayed.
3. Select the SIP > Advanced tab; the 'SIP Advanced Configuration' frame appears.
4. Select the MLPP tab; the following screen appears:
5. Configure the MLPP parameters as required.
Notes:
SIP User's Manual
•
The 'Preemption Tone Duration' parameter should be set to "0".
•
If the following RTP DSCP parameters are set to "-1" (i.e., Not
Configured, Default), the DiffServ value is set with the
PremiumServiceClassMediaDiffserv global gateway parameter, or by
using IP Profiles: MLPPRoutineRTPDSCP, MLPPPriorityRTPDSCP,
MLPPImmediateRTPDSCP, MLPPFlashRTPDSCP,
MLPPFlashOverRTPDSCP, MLPPFlashOverOverRTPDSCP,
MLPPNormalizedServiceDomain.
244
Mediant 3000
Document #: LTRT-89707