Provisioning E911/Mlpp Parameters; Figure 5-6: Mlpp Screen - AudioCodes Media Pack MP-124 User Manual

5.7

Provisioning E911/MLPP Parameters

This section describes how to configure the E911/MLPP (Multi-Level Precedence and
Preemption) parameters using the EMS.

To configure the E911/
1. In the MG Tree, select the device.
2. Double-click the desired Media Gateway; the Status screen is displayed.
3. In the 'SIP Advanced Configuration' frame, click the MLPP
appears:
4. Configure the MLPP parameters as required.
Notes:
SIP User's Manual
MLPP parameters:

Figure 5-6: MLPP Screen

•
•
If the following RTP DSCP parameters are set to "-1" (i.e., Not
Configured, Default), the DiffServ value is set with the
PremiumServiceClassMediaDiffserv global gateway parameter, or by
using IP Profiles: MLPPRoutineRTPDSCP, MLPPPriorityRTPDSCP,
MLPPImmediateRTPDSCP, MLPPFlashRTPDSCP,
MLPPFlashOverRTPDSCP, MLPPFlashOverOverRTPDSCP,
MLPPNormalizedServiceDomain.
204
MP-11x & MP-124
tab; the following screen
Document #: LTRT-65412