SIP User's Manual
5.7
Provisioning SIP MLPP Parameters
This section describes how to configure the MLPP (Multi-Level Precedence and
Preemption) parameters using the EMS.
To configure the MLPP parameters:
1.
In the Navigation pane, select VoIP > SIP, and then in the Configuration pane,
select SIP Advanced Configuration; 'SIP Advanced Configuration' frame appears.
2.
Select the MLPP tab; the 'MLPP' screen appears.
3.
Configure the MLPP parameters as required.
Note:
Version 6.2
If the following RTP DSCP parameters are set to "-1" (i.e., Not Configured,
Default),
the
PremiumServiceClassMediaDiffserv global gateway parameter, or by using IP
Profiles:
MLPPRoutineRTPDSCP,
MLPPImmediateRTPDSCP,
MLPPFlashOverRTPDSCP,
MLPPNormalizedServiceDomain.
DiffServ
value
MLPPFlashOverOverRTPDSCP,
207
5. EMS-Based Management
is
set
with
MLPPPriorityRTPDSCP,
MLPPFlashRTPDSCP,
February 2011
the