Horizontal Size Adjustment; Vertical Linearity Adjustment - Barco R9002411 Owner's Manual

Horizontal Size Adjustment

Use the arrow keys to highlight H Size in the Geometry menu and then press ENTER.
ENTER will select H Size adjustment
EXIT returns to Random Access adjustment menu.
ADJUST returns to operational mode.
Adjust the size by using the arrow keys till the correct H size is achieved.
Note :
µ
if the internal # pattern was selected, the pattern remains on the screen.
µ
if the genlocked pattern was selected, the external source will be displayed.
A bar scale and a numeric indicator help to adjust the horizontal size.
Hint : In order to avoid loss of resolution in the projected image and to ensure maximum CRT life,
do not use an excessively small horizontal size setting.
EXIT will return to the Geometry menu.
Ideal image size
H size too large

Vertical Linearity Adjustment

The vertical linearity adjustment function corrects for vertical nonlinearities, which extend from the center of the image to the top
and bottom.
Use the arrow keys to highlight V Linearity in the Geometry menu and then press ENTER.
Adjust the vertical linearity with the left and right arrow keys until the distances between the horizontal lines of the setup pattern
are equal at top and bottom.
ENTER selects vertical linearity adjustment.
EXIT returns to Random Access Adjustment menu.
ADJUST returns to operational mode.
EXIT will return to Geometry menu.
R5976101.02 BARCO CINE5 310102 ___________________________________________________________________________
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
or
Select with
then <ENTER>
<EXIT> to return
H size too small
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
or
Select with
then <ENTER>
<EXIT> to return
Random Access Adjustment Mode
H SIZE
50
V LINEARITY
60
6-9