Vertical Size Adjustment; Blanking Adjustment - Barco R9002411 Owner's Manual

Random Access Adjustment Mode

Vertical Size Adjustment

Use the arrow keys to highlight V size in the Geometry menu and then press ENTER.
ENTER will select vertical size adjustment
EXIT returns to Random Access Adjustment menu
ADJUST returns to operational mode
Adjust the vertical size with the up and down arrow keys until the exact image height is obtained.
Note :
µ
if the internal # pattern was selected, the pattern remains on the screen.
µ
if the genlocked pattern was selected, the external source will be displayed.
A bar scale and a numeric indicator on screen help in doing the vertical size adjustment.
Hint : in order to avoid loss of resolution in the projected image and to ensure maximum CRT life, do not
use an excessively small vertical size setting.
EXIT will return to the Geometry menu.
Blanking Adjustments
Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on the screen
and to blank out unwanted information or noise.
A 0 % on the bar scale indicates no blanking.
To start up the Blanking adjustment, use the following procedure :
Use the arrow keys to highlight BLANKING in the Geometry menu and then press ENTER.
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM(N-S)
H SIZE
V LINEARTIY
V SIZE
BLANKING
Select with
then <ENTER>
<EXIT> to return
The following corrections are possible :
- Top blanking
- Bottom blanking
- Left blanking
- Right blanking
If the internal # pattern was selected, the pattern remains on the screen.
If the genlocked pattern was selected, the external source will be displayed.
6 - 1 0 ___________________________________________________________________________ R5976101.02 BARCO CINE5 310102
or
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
Select with
then <ENTER>
<EXIT> to return
Image too
Tall
Ideal Image Height
BLANKING
TOP
BOTTOM
LEFT
RIGHT
or
Select with
then <ENTER>
<EXIT> to return
Left Blanking
or
Image too
Short
Top Blanking
Bottom Blanking
V
50
Right Blanking