Vertical Size Adjustment - Barco R9002321 Owner's Manual

Vertical Size Adjustment

Adjust the vertical size by push-
ing the control disc up or down
until the exact image height is
obtained.
Note :
- if the internal # pattern was
selected, this pattern re-
mains on the screen.
- if the genlocked pattern was
selected, the external
source will be displayed.
A bar scale and a number indi-
cator (between 0 and 100 )
give a visual indication of the
vertical size adjustment.
7-18
Correct by pushing
the control disc
down.
Correct by pushing
the control disc up.
R5975059 BARCOVISION 708 MULTIMEDIA 200498