Memory Management; What Can Be Done; How To Select; Copy A Block - Barco R9002380 Owner's Manual

Mode [ON/OFF] :
Select Mode and toggle with ENTER between ON and OFF.
ON : BARCO logo will be displayed on the screen when leaving the adjustment mode.
To position the logo on the screen, push the cursor key up, down, to the left or to the right until the desired
position is reached.
OFF : No BARCO logo displayed on the screen when leaving the adjustment mode.
Size [SMALL/LARGE] :
Select Size and toggle with ENTER between Small and Large.
SMALL : Small BARCO logo will be displayed if mode is on.
LARGE : Large (double size) BARCO logo will be displayed if mode is on.
Background [ON/OFF] :
Select Background and toggle with ENTER between ON and OFF.
ON : BARCO logo will be displayed on a black background.
OFF : BARCO logo will be displayed without any background.
Orbiting [ON/OFF] :
Select Orbiting and toggle with ENTER between ON and OFF
ON : the BARCO logo will orbit around its axis.
OFF : no orbit of the BARCO logo.

Memory management

What can be done ?

Within the memory management menu, the following items can be consultated or executed :

- copy a block

- delete a block
- delete all blocks
- all settings to midposition
- R & B convergence to mid
- Gr convergence mid (only if green convergence is available)
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1

How to select ?

To select Memory Management :
1. Push the cursor key é or ê to highlight Memory Management (menu 1).
2. Press ENTER to select.
The memory management menu will be displayed (menu 2).
Copy a block
What can be done ?
The copy a block function copies the settings of a selected block into the active block.
5976066 BARCOCINE 7 011299
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
BARCO
BARCO
Service Mode
8-7