Troubleshooting And Maintenance; Display Messages - Toshiba e-STUDIO 203S Operator's Manual

8
Chapter 8
TROUBLESHOOTING AND
MAINTENANCE
Problems related to general use of the machine, the copy function, and software
setup are explained here. Be sure to check the problem carefully before calling for
service, as many problems can be solved by the user.
If you are unable to solve the problem, turn off the main switch, unplug the power
cord from the outlet, and contact your dealer.
Note

DISPLAY MESSAGES

When the following indicators light up or blink on the operation panel or the following
alphanumeric codes appear in the display, solve the problem immediately referring
to both the table below and the indicated page.
Note
Lamp indicator
Tray
location Blinks
indicator
Error
indicator Blinks
For problems related to the printer and scanner functions, see the
online manual.
Be sure to use only genuine TOSHIBA parts and supplies.
Indication
Display
BYPASS : ADD
PAPER
TRAY<*> : ADD
PAPER
CLOSE PAPER
TRAY<*>
CLEAR PAPER JAM. A paper misfeed has occurred.
ADF/RADF JAM.
FRONT OR SIDE
COVER OPEN.
CLOSE COVERS.
CLOSE THE ADF/
RADF COVER.
REPLACE THE
TONER CARTRIDGE.
SYSTEM ERROR
[XX - XX] REFER
TO USER GUIDE
Get other manuals https://www.bkmanuals.com
Cause and remedy
The indicated paper tray is not attached,
is attached incorrectly, or has run out of
paper. (The tray is indicated in <*>.)
Remove the misfeed as explained in
"MISFEED REMOVAL".
The cover is open. Close the cover.
The document cover/RADF cover is open.
Close the document cover/RADF cover.
The toner cartridge is empty. Replace
the toner cartridge with a new cartridge.
When [L1-00] appears, the scan head
locking switch is locked. Turn off the
power, release the scan head locking
switch, and turn the power back on.
When [F2-02] appears, check the toner
cartridge and make sure that the seal is
not still affixed.
The machine will not function. Turn the
power switch off, wait about 10 seconds,
and then turn on the switch again. If this
does not clear the error, remove the power
cord from the outlet, and contact your
service technician.
Page
15
70
-
-
74
8
76
-
-
61