User Programs (Power Save Modes, Auto Clear Time, Stream Feeding Mode); Setting The Power Save Modes And Auto Clear Time - Toshiba e-STUDIO 12 Operator's Manual

TONER SAVE MODE
Press and hold down the exposure mode selector key for approximately 5 seconds.
The MANUAL (
blink. The exposure indicator marked "5" will light up, indicating the standard toner
mode is active.
To enter the toner save mode, press the light (
3
The exposure indicator marked "1" will light up, indicating the toner save mode is
selected.
Press the exposure mode selector key twice. The PHOTO (
and the AUTO( ) indicator will light up steadily. The toner save mode is now active.
USER PROGRAMS (power save modes, auto
clear time, stream feeding mode)
The user programs allow the parameters of certain functions to be set, changed, or canceled
as desired.

Setting the power save modes and auto clear time

Press and hold down the light (
5 seconds until all the alarm indicators (
the display.
Use the left copy quantity (
time, 2: preheat mode, 3: auto power shut-off timer, 4: stream feeding mode, 5: auto
power shut-off mode). The selected number will blink in the left side of the display.
20
) indicator will go out and the PHOTO (
To return to the standard mode, repeat the procedure but use the dark (
key to select exposure level "5" in step 3.
) key.
) and dark ( ) keys simultaneously for more than
, , and ) blink and "– –" appears in
) key to select a user program number (1: auto clear
) indicator will begin to
) indicator will stop blinking
)