Preventive Maintenance (Pm) Items - Toshiba e-STUDIO 550 Servicec Support Manual

G. Preventive Maintenance (PM) Items
In order to use the e-STUDIO550/650/810 and maintain it in good condition, preventive maintenance,
such as cleaning, parts replacement, etc., must be performed every time a fixed number of the copies
and printouts has been made in the copier.
The cycle of preventive maintenance performed according to a fixed period (PM cycle) differs
depending on the model. The PM cycle of each model and the contents of the maintenance to be
performed are as shown below.
e-STUDIO550 (PM cycle: 400k sheets)
Installation
0 400k
C
L
R-a
e-STUDIO650 (PM cycle: 460k sheets)
Installation
0 460k
C
L
R-a
e-STUDIO810 (PM cycle: 500k sheets)
Installation
0 500k 1000k
C C
L L
R-a R-a
R-b
The meanings of the symbols in the above are as follows:
C: Cleaning --- Refer to "Cleaning items" table.
L: Lubrication --- Refer to "Lubrication items" table.
R-a: Replacement parts (a) --- Refer to "Replacement items (a)" table.
R-b: Replacement parts (b) --- Refer to "Replacement items (b)" table.
June 2002 ©TOSHIBA TEC
800k 1200k
C C
L L
R-a R-a
R-b
920k 1380k
C C
L L
R-a R-a
R-b
1500k 2000k 2500k
C C C
L L L
R-a R-a R-a
R-b
5-7
1600k 2000k
C
L
R-a
R-b
1840k 2300k
C C
L L
R-a R-a
R-b
3000k 3500k 4000k
C C C
L L L
R-a R-a R-a
R-b R-b
e-STUDIO550/650/810 Service Features
Machine life
(Average)
2150k
C
L
R-a
Machine life
(Average)
2760k 2940k
C
L
R-a
R-b
Machine life
(Average)
4500k 4890k
C
L
R-a