Table of Contents
Advertisement
Configuring Settings for Recording
There are multiple ways to setup your NVR for recording. They include setting up a recording schedule,
triggering a recording by motion detection and/or a sensor alarm, and manually starting the recording.
Configuring Recording Settings
Before setting your NVR up for recording, certain settings should be configured first. These settings can be found
in the Recording Configuration menu, shown in Figure 21.
The first set of settings to configure in this menu is the recording quality settings. To configure the recording
quality settings:
1. Enter the Recording Quality Settings menu by going to Main Menu > Recording Configuration > Recording
Quality Settings. The Recording Quality Settings menu is shown in Figure 22.
2. Select the camera to configure in the camera drop down menu on the upper left of the menu. If all cameras
are to be configured with the same settings, select All Cameras from the list.
3. Select the Encoding Parameters mode to configure. Either Continuous or On Event can be selected.
4. Select the recording camera resolution in the Resolution drop down menu. The options for the camera
recording resolution include 4CIF, 2CIF, CIF and QCIF.
Figure 21. Recording Configuration Menu
Figure 22. Recording Quality Settings Menu
28
Advertisement
Table of Contents
