Login; Live Mode; Video Recording; Panic Recording - Eneo PNR-5332/3TB Quick Installation Manual

Login

Configuring the NVR's settings and accessing its searching
and other functions require an authorized user login.
1
While in Live mode, right-click on the mouse and select
Login and either press the SETUP button on the remote
control.
2
Select a user, enter the password, and then select OK.
Basic Feature

Live Mode

Once Camera Registration is complete, the system will enter
Live Mode.
Press the MENU button on the NVR's front panel while in
Live mode to bring up the Live menu on the right edge of the
screen. Press MENU button once more to hide the menu. Use
the Arrow buttons on the remote control to select the menu
options.

Video Recording

Records the live video.
Refer to the Operation Manual for more information.

Panic Recording

Select Live or Search menu's Panic Recording
press the Panic button on the front panel or the remote con-
trol to commence panic recording on all registered cameras.
To stop Panic Recording, select the Panic Recording
or press the Panic button again. If the Panic Recording
Duration option under Record Setup > General has been
configured, Panic Recording will automatically terminate after
the specified duration of time has elapsed.
• Panic Recording takes place irrespective of any record-
ing schedule set up by the user.
• Panic Recording video profile from Record Setup –
General applies to all Panic Recording videos.
3
To log out, right-click on the mouse and select Logout.
Panic Recording will not take place if recording mode
is not set to Recycle and the HDD has reached 100% of
its capacity.

Audio Recording

If the Record Audio option under Record Setup > General
has been enabled, the camera will record audio along with
video.
Check your local laws and regulations on making audio
recordings.

Video Recording Playback

You can play back video recordings by using a mouse or
remote control.
icon or

All Channel Playback

icon
1
Press the Menu button while in Live mode.
2
Select the Search Mode
Lapse Search or Event Log Search.
3
The selected search mode will be initiated.
• There is no default password for the admin
account. Select admin and then OK without
entering a password to log in.
• Leaving the admin account unassigned with a
password poses a security risk. Please assign a
password at your earliest convenience. A warning
message will continue to be displayed until a
password is assigned.
• Click on the button next to the password
field using the mouse. This will bring up a virtual
keyboard you can use to assign a password.
icon and then select Time-
9