2-2. METHOD OF LENS UNIT DISASSEMBLY
1 Remove the screw and the tape that is the fixation of Flexible
Board.
2 Remove three screws for connection.
HVR-V1J/V1U/V1N/V1E/V1P/V1C
Screw
Flexible Board
Three Screws
Do not damage
Flexible Board.
3 Remove after rotating the Ring Unit a little.
Ring Unit
Tape
Note: Avoid Flexible Board from the Lens Unit when you install
the Lens Unit.
2-9E
Lens Unit
Do not damage Flexible Board.
Flexible Board
Avoid Flexible Board
from the Lens Unit.
Ring Unit
Lens Unit