Sony HVR-V1U Service Manual page 401

Digital hd video camera recorder
Hide thumbs Also See for HVR-V1U:
Table of Contents

Advertisement

480i
Select when connecting your camcorder to
a TV with the component input jack.
B 1080i/480i
Select when connecting your camcorder to
a TV that has the component input jack
and is capable of displaying the 1080i
signal.
i.LINK CONV
You can convert HDV format signals to DV
format signals, and output the DV format
signals from the
HDV/DV interface
(i.LINK).
B OFF
Outputs the pictures from the
interface (i.LINK) in accordance with the
settings in [REC FORMAT] and [VCR
HDV/DV].
ON
Pictures in HDV format are converted to
DV format, and pictures in DV format are
output in DV format.
b Notes
• For input signal via an i.LINK connection, see
[VCR HDV/DV] (p. 75).
• Disconnect the i.LINK cable before setting
[i.LINK CONV]. Otherwise, the connected
video device may not be able to recognize the
video signal from your camcorder.
DOWN CONVERT
You can set an output video signal format
for playing back movies recorded in the
HDV format.
Use this function for the following outputs.
– COMPONENT (480i)
– S VIDEO
– AUDIO/VIDEO
B SQUEEZE
Select to output video signals to a 16:9
wide TV or compatible.
On 16:9 wide TV
LETTER BOX
Select to output a video signal to a TV that
is not 16:9 compatible.
On standard 4:3 TV
HDV/DV
EDGE CROP
Select to output the central portion of an
image with a ratio aspect of 4:3 by
cropping the sides of the image.
On standard 4:3 TV
b Notes
• When a movie recorded in the DVCAM (DV)
format with [DV WIDE REC] set to [ON] is
viewed on a standard 4:3 TV, the images may
appear vertically compressed. In this case, set
[DV WIDE REC] to [OFF] before recording.
• The i.LINK output becomes a [SQUEEZE]
output
On 16:9
compatible 4:3 TV
77

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-v1nHvr-v1cHvr-v1jHvr-v1eHvr-v1p

Table of Contents