Sony HVR-V1U Service Manual page 271

Digital hd video camera recorder
Hide thumbs Also See for HVR-V1U:
Table of Contents

Advertisement

3-25.
LS Chassis Block, Mechanism Chassis Block-1
1. Removal procedure
Enter the [ULE] mode.
1)
Remove the screw (special head screw M1.4 × 1.4) 1.
2)
Remove the screw (special head screw M1.4 × 1.4) 2.
3)
4)
Remove the cam gear ass'y shaft 3 from the LS cam plate
groove of the LS chassis block.
5)
Remove the LS chassis block 4 in the direction of the arrow
A.
LS cam plate groove
3 Cam gear ass'y shaft
HVR-V1J/V1U/V1N/V1E/V1P/V1C
Be sure to remove each
part from the block before
disassembling/re-assembling.
Grooves of the LS
6
chassis ass'y
Shafts of the mecha
chassis ass'y
6)
Disengage the GL rack groove 5 of the LS chassis block from
the GL rack shaft.
7)
Disengage the grooves in two locations 6 of the LS chassis
from the two shafts of the mechanism chassis.
8)
Remove the LS chassis block 7 from the mechanism chassis
block 8 in the direction of the arrow B.
Pendulum ass'y
Tension
regulator ass'y
1 Screw
(M1.4 × 1.4)
A
B
6-113
Pinch arm ass'y
TG6 block
ass'y
Remove the LS chassis
4
block in the direction of
the arrow
.
A
2 Screw
(M1.4 × 1.4)
5 GL rack groove
GL rack shaft
7 LS chassis ass'y
Be careful not to damage the flexible board.
8 Mecha chassis ass'y

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-v1nHvr-v1cHvr-v1jHvr-v1eHvr-v1p

Table of Contents