Sony HVR-V1U Service Manual page 276

Digital hd video camera recorder
Hide thumbs Also See for HVR-V1U:
Table of Contents

Advertisement

3-29.
Cam Gear Ass'y
1. Removal procedure
1) Remove the screw (special head screw M1.4 × 1.4) 1.
2) Remove the cam gear ass'y 2 from the cam gear shaft.
Apply grease
Points
to be noted
Apply grease when installing
Amount of grease: A ball of
grease of 1.0 mm diameter
Side of inside
Cam gear assy
Cam gear assy
Key Points
in Re-assembling
HVR-V1J/V1U/V1N/V1E/V1P/V1C
1 Screw
(M1.4 × 1.4)
2 Cam gear ass'y
Dowel B
Cam gear assy
Mode gear assy
Dowel B
Cam gear assy
A
Mode slider assy
6-118
2. Attachment procedure
1) Apply grease on the specified locations of the cam gear ass'y 2.
Amount of grease: A ball of grease of 1.0 mm diameter.
2) Move the mode slider ass'y in the direction of arrow A as far
as it can go.
3) Align the gear phase of the mode gear ass'y and the cam gear
ass'y 2.
4) Install the cam gear ass'y 2 while engaging the dowel B of
the mode slider ass'y into the groove of the cam gear ass'y.
5) Install the screw (special head screw M1.4 × 1.4) 1.
Tightening torque: 0.04 ± 0.01 N•m (0.61 ± 0.1 kgf•cm)
Cam gear shaft
Mode gear ass'y

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-v1nHvr-v1cHvr-v1jHvr-v1eHvr-v1p

Table of Contents