Step 2: Attaching The Supplied Microphone And The Lens Hood With Lens Cover - Sony HVR-V1U Service Manual

Digital hd video camera recorder
Hide thumbs Also See for HVR-V1U:
Table of Contents

Advertisement

Step 2: Attaching the supplied microphone and
the lens hood with lens cover
Attaching the supplied
microphone
1
2
3
4
5
6
1
Attach the wind screen 1 to the
microphone 2.
2
Loosen the screw of the
microphone holder 3 and open
the cover.
3
Place the microphone into the
holder with the model name
facing upward, close the cover,
and tighten the screw.
14
4
Connect the plug of the
microphone to the INPUT1 jack
5.
5
Put the microphone cable into the
cable holder 4.
6
Select the channel with the REC
CH SELECT switch 6.
The REC CH SELECT switch positions
and the channels to be used at the switch
positions are shown in the table below.
REC CH SELECT
switch position
CH1, CH2
CH1
z Tips
• See page 42 for adjusting the volume.
• Set the +48V switch to ON when you use the
supplied microphone.
Channel to
Input jack
be used
INPUT1
Channel1
Channel2
INPUT2
-
INPUT1
Channel1
INPUT2
Channel2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-v1nHvr-v1cHvr-v1jHvr-v1eHvr-v1p

Table of Contents