Lens Unit - Sony PMW-300 Service Manual

2-19.

Lens Unit

Preparation
1. Remove the bottom panel assembly. (Refer to
2. Remove the inside panel assembly. (Refer to
3. Remove the outside panel assembly. (Refer to
4. Remove the rear panel assembly. (Refer to
5. Remove the handle assembly. (Refer to
6. Remove the IO block. (Refer to
7. Remove the DCP-64 board. (Refer to
8. Remove the front lens assembly. (Refer to
Procedure
1. Remove the two screws to detach the front switch panel assembly.
TP2 x 4
2. Remove the CMOS harness guide sheet.
3. Remove the screw (P2 x 4) to detach the front harness cover.
PMW-300
"2-5. Bottom Panel
"2-6-1. Inside Panel
"2-7-1. Outside Panel
"2-8. Rear Panel Assembly")
"2-11-1. Handle Assembly")
"2-10. IO Block")
"2-14. DCP-64 Board")
"2-15. Front Lens
Assembly")
Assembly")
Assembly")
Assembly")
Front switch panel assembly
2-53