Sony HVR-V1U Service Manual page 365

Digital hd video camera recorder
Hide thumbs Also See for HVR-V1U:
Table of Contents

Advertisement

6 Repeat steps 4 and 5 to adjust other
items.
7 Select [
RETURN] by turning the
SEL/PUSH EXEC dial A, then press
the dial.
8 Select [OK] by turning the SEL/PUSH
EXEC dial A, then press the dial.
A picture profile indicator appears.
b Note
• In the case of [TYPE3] of [SKINTONE
DTL], the effect may also be applied to a
color that is not a skin color.
To check the picture profile settings
During recording or during standby, press
the STATUS CHECK button B (p. 48).
z Tip
• You can assign picture profiles to the ASSIGN
buttons and use them to turn the picture profiles
on and off (p. 43).
To name the picture profile settings
You can name on picture profile1~6.
1 Press the PICTURE PROFILE button
C.
2 Select the picture profile that you want
to name by turning the SEL/PUSH
EXEC dial A, then press the dial.
3 Select [SETTING] t [PROFILE
NAME] by the SEL/PUSH EXEC dial
A.
4 Select a letter by turning the SEL/PUSH
EXEC dial A, then press the dial.
Repeat this operation until a complete
name is entered.
PICT. PROFILE
P I CTURE PROF I LE
CANCEL
OK
END
z Tip
• Each name can be up to 12 characters long.
Characters that can be used in profile
names:
• A~Z
• 0~9
• - _ / #
& : . @
5 Select [OK] by turning the SEL/PUSH
EXEC dial A, then press the dial. The
profile name is changed.
6 Select [
RETURN] t [OK] by the
SEL/PUSH EXEC dial A.
To copy the picture profile setting to
other picture profiles
1 Press the PICTURE PROFILE button
C.
2 Select the picture profile that you want
to copy from by turning the SEL/PUSH
EXEC dial A, then press the dial.
3 Select [SETTING] t [COPY] by SEL/
PUSH EXEC dial A.
4 Select the number of the picture profile
that you want to copy to by turning the
SEL/PUSH EXEC dial A, then press
the dial.
5 Select [YES] by turning the SEL/PUSH
EXEC dial A, then press the dial.
6 Select [
RETURN] t [OK] by the
SEL/PUSH EXEC dial A.
To reset the picture profile settings
You can reset the picture profile settings by
each picture profile number. You cannot
reset all picture profile settings at once.
1 Press the PICTURE PROFILE button
C.
2 Select the picture profile by turning the
SEL/PUSH EXEC dial A, then press
the dial.
3 Select [SETTING] t [RESET] t
[YES] t [
RETURN] t [OK] by
the SEL/PUSH EXEC dial A.
41
Continued ,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-v1nHvr-v1cHvr-v1jHvr-v1eHvr-v1p

Table of Contents