Sony HVR-V1U Service Manual page 258

3-12. S Positioning
1. Removal procedure
1) Remove the tension coil spring (SB) 1 from the hook of the S
positioning 2.
2) Rotate the S positioning in the direction of the arrow A, and
remove the claw 3 and disengage the dowel.
3) Remove the claw 4 and remove the S positioning 5.
1 Extension spring
(SB)
2 Hook of the S positioning
S positioning
Dowel
Claw 3
HVR-V1J/V1U/V1N/V1E/V1P/V1C
Claw 4
A
2. Attachment procedure
1) Insert the claw 4 of the S positioning 5 in the hole of the LS
chassis.
2) Engage the claw 3 and the dowel.
3) Insert the tension coil spring (SB) 1 into the hook of the S
positioning 2.
Key Points in Re-assembling
S positioning
5 S positioning
6-100
S brake block ass'y
Extension spring (SB)
(Be careful not to elongate the spring hook.)