Sony HVR-V1U Service Manual page 400

Digital hd video camera recorder
Hide thumbs Also See for HVR-V1U:
Table of Contents

Advertisement

Press the MENU button t select the
dial.
DV SP (
Record in the SP (Standard Play) mode of
the DV format to record for a longer time
on a tape than in the DVCAM format.
b Notes
• If you record in the DV SP mode, a mosaic-like
disturbance of picture may appear or sound may
be interrupted when you play back the tape on
other camcorders or VCRs.
• When you mix recordings in the DVCAM mode
and in the DV SP mode on one tape, the
playback picture may be distorted or the time
code may not be continued properly between the
scenes.
DV WIDE REC
You can select the aspect ratio for recording
according to a type of your TV. Refer also
to the instruction manuals supplied with
your TV.
B ON
Records pictures in the size that matches
the full screen of a 16:9 (wide) TV.
OFF (
)
Records pictures in the size that matches
the full screen of a 4:3 TV.
b Notes
• Set [DOWN CONVERT] correctly according to
the TV connected for playback (p. 77).
• When you select HDV format, the image size is
fixed to 16:9. You cannot record in 4:3 size.
76
)
(IN/OUT REC) by turning the SEL/PUSH EXEC
EXT REC CTRL
You can connect your camcorder to an
HDV/DVCAM/DV compatible device
(digital HD video camera recorder, digital
video camera recorder, hard disc recorder,
etc.) with an i.LINK cable, and record
movies on your camcorder and the
connected device simultaneously, or
continue recording from your camcorder to
the connected device.
Refer also to the instruction manual
supplied with the devices that you are
connecting.
REC CTL MODE
x
B OFF
Select not to record on a connected device.
SYNCHRONOUS (
Select to record movies, sound and time
code on a connected device in
synchronization with your camcorder.
RELAY (
Select to record movies, sound and time
code on a connected device when a tape on
your camcorder reaches close to the end
during recording.
STBY COMMAND
x
B REC PAUSE
Select to be able to stop recording on a
connected device and set it to REC
PAUSE using the recording stop operation
of your camcorder.
STOP
Select to be able to stop recording on a
connected device by setting it to STOP
using the recording stop operation of your
camcorder.
COMPONENT
You can select the type of connection when
connecting your camcorder to a TV with
the component input jack.
)
)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-v1nHvr-v1cHvr-v1jHvr-v1eHvr-v1p

Table of Contents