Sony HVR-V1U Service Manual page 197

Digital hd video camera recorder
Hide thumbs Also See for HVR-V1U:
Table of Contents

Advertisement

10. Optical Axis Adjustment
Correct a deviation of optical axis between the lens and the imager.
If deviated, the screen center will be shifted when the lens is zoomed
from TELE end to WIDE end.
Note 1: Perform this adjustment only when replacing the lens
block. When the microprocessor, circuit etc. is damaged,
don't perform this adjustment but check the optical axis.
Note 2: When performing this adjustment, place the camcorder
on a level place, and take care not to move the camcorder
during the adjustment.
Switch setting
1) POWER ......................................................... CAMERA mode
2) ND FILTER ...................................................................... OFF
3) FOCUS ................................................................... MANUAL
4) STEADY SHOT (Menu setting) ..................................... OFF
5) TV TYPE (Menu setting) ............................................... 16 : 9
HVR-V1J/V1U/V1N/V1E/V1P/V1C
6-39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-v1nHvr-v1cHvr-v1jHvr-v1eHvr-v1p

Table of Contents