Configuring Switch Ports As 802.1X Authenticators; Enable 802.1X Authentication On Selected Ports - HP ProCurve 6400cl Series Access Security Manual

N o t e
Configuring Switch Ports as 802.1X
Authenticators
802.1X Authentication Commands
[no] aaa port-access authenticator < [ethernet] < port-list >
[control | client-limit | quiet-period | tx-period | supplicant-timeout |
server-timeout | max-requests | reauth-period | auth-vid |
unauth-period | unauth-vid | initialize | reauthenticate |
clear-statistics | logoff-period]
aaa authentication port-access
< local | eap-radius | chap-radius >
[no] aaa port-access authenticator active
[no] port-security [ethernet] < port-list > learn-mode port-access
802.1X Open VLAN Mode Commands
802.1X Supplicant Commands
802.1X-Related Show Commands
RADIUS server configuration

1. Enable 802.1X Authentication on Selected Ports

This task configures the individual ports you want to operate as 802.1X
authenticators for point-to-point links to 802.1X-aware clients or switches.
(Actual 802.1X operation does not commence until you perform step 5 on page
10-14 to activate 802.1X authentication on the switch.)
If you enable 802.1X authentication on a port, the switch automatically dis­
ables LACP on that port. However, if the port is already operating in an LACP
trunk, you must remove the port from the trunk before you can configure it
for 802.1X authentication.
Configuring Port-Based and Client-Based Access Control (802.1X)

Configuring Switch Ports as 802.1X Authenticators

Page
10-15
10-15
10-19
10-15
10-36
10-21
10-38
10-42
10-20
10-15