Chapter 4: Sdi Live Video Input And Control; Connecting Live Video; Configuring The Sdi Video Input Source - High End Systems DLHD High Definition Digital Light User Manual

Chapter 4:
SDI Live Video Input and Control
The graphics engine in a DLHD fixture can receive SDI video from an
external source.
A DLHD fixture can project other live video sources connected to the fixture's SDI, input
ports. Live SDI input can then be enhanced and manipulated by the graphics engine.
NOTE: You can configure the graphics engine to capture video from an external
source or the internal camera but not from both at the same time.

Connecting Live Video

The DLHD fixture has video connectors for SDI on its rear panel, as shown in the following
figure.
USB 1
100-120 V;
USB 2
50-60Hz; 7A
200-240 V;
50-60Hz; 3.5 A

Configuring the SDI Video Input Source

SDI capture is another option for input and output to the graphics engine.
NTSC and PAL formats are available for Standard Definition SDI capture. There is no support
for SECAM.
High Definition SDI capture accepts the following formats:
NOTE: A reboot is not required to change the SDI format selection.
Changes to the SDI format take place instantly on the DLHD fixture.
DLHD Digital Light User Manual
1080 30PsF
NTSC_M
1080 29.97PsF
NTSC_MJ
1080 25PsF
1080 24PsF
1080 23.97PsF
SDI Output
720 60p
720 59.94p
720p
SDI Input
37