Menu System Options; Address Menu; Setting A Start Channel - High End Systems Shapeshifter C1 User Manual

CHAPTER 3
Menu System

Menu System Options

The following sections describe and give examples for selecting and/or setting available fixture
configuration options.

Address Menu

Address is the top level menu selection used to set the fixture's DMX start channel. You can
address the fixture before applying power in the battery mode or in normal mode after you power
up the fixture.
Note: The last valid Start channel for a SHAPESHIFTER fixture is 485
(Reduced Protocol) or 434 (Enhanced Protocol).

Setting a Start Channel

To address a SHAPESHIFTER fixture in battery mode:
1. Turn on the menu system by pressing and holding the
Battery button for two seconds. The display will show
the current Function and Start Channel assigned to the
fixture.
2. Press the MODE/ESC button to enter the first level
MODE
/ ESC
of the menu system. The display will show Address and
Info as the first two options in the top menu level.
*
The red star indicates the current menu as you scroll
through the level using the
The number at the bottom left of the display indicates
the Menu Level you are on. Address is the first option
on the first level.
3. Press the Enter button to choose Address. The
currently selected Start Channel is displayed in white.
4. Use the buttons to scroll to the desired start
channel and press
20
buttons.
to select.
Fu n c ti o n : D M X R e c e ive
Address:
001
Menu: Press <Mode>
Address:
Info
Address
001
SHAPESHIFTER User Manual
073F
01
01-01