Checking function of side-stand
46 00
switch
(Inspections I, II and III)
•
Switch off the engine.
•
Place motorcycle on its centre stand.
•
Select a gear and switch on the ignition.
–
Temperature gauge warning light lights up.
•
Extend the side stand, observing the tempera-
ture gauge warning light.
–
Temperature gauge warning light goes out (engi-
ne control unit switches off).
Greasing pivot of side stand,
46 00
checking main (centre) stand
(Inspections II, III and IV)
Greasing the side stand pivot
•
Check that the side stand moves freely, and
grease it if necessary.
•
Grease bearing bush (arrow) with a grease gun
until fresh grease emerges at the lubricated fa-
ces.
Lubricant:
for bushing ................................. Shell Retinax EP2
Checking the centre stand, grea-
46 00
sing it if necessary
Checking the centre stand
–
Remove the engine spoiler (
–
Remove engine spoiler holder (
•
Attach engine lifter.
•
Check whether the centre stand retracts auto-
matically.
–
The centre stand has to be lubricated if it does
not retract automatically.
L
Note:
The centre stand must be removed for lubrication.
Greasing the centre stand
•
Retract the centre stand.
•
Using spring tensioner, BMW No. 46 5 710, ten-
sion the springs until they can be detached from
KL000410
the pivot mount (arrow).
•
Release the spring tensioner and take off the pla-
te with the springs.
46.14).
a
46.14).
a
46 5 710
KR460550
00.71