Checking clutch fluid level, cor-
21 00
recting if necessary
(Inspections II and III)
e
Attention:
Do not allow brake fluid to come into contact with
painted parts of the motorcycle, because brake fluid
destroys paint.
–
Place the motorcycle on its centre stand so that
it is level.
•
Turn the handlebars to the right.
L
Note:
The level of fluid in the expansion tank increases as
wear to the clutch lining increases.
e
Attention:
Reliable operation of the clutch is not ensured when
the level of the fluid (arrow) is below the upper mar-
king ring.
•
The clutch fluid should never drop below the le-
vel for initial filling: if it does, check the clutch sy-
stem for leaks.
Specified level with a new clutch liner:
No more than
................................................. upper ring marking
Brake fluid....................................................DOT 4
K41000010
00.61