36 3 618
Static balancing of front and
36 30
rear wheels
Static balancing of front wheel
36 30
–
Align the balancer, BMW No. 36 3 600, with
knurled screws (2)/spirit level (1).
•
Insert the balancing shaft, BMW No. 36 3 621,
through the front wheel.
•
Screw the balancing shaft up handtight with
knurled nut, BMW No. 36 3 622.
•
Place front wheel on balancer,
BMW No. 36 3 600.
•
Rotate the front wheel and allow it to come to a
halt.
•
Clean the attachment points for the adhesive
weights.
e
Important:
The maximum balancing weight is 60 g!
•
Attach the adhesive balance weights, equally
distributed between the left and right sides of the
wheel rim, opposite the heaviest point on the
wheel.
•
Repeat the balancing procedure as a check.
36 3 600
36 30
L
The rear wheel can also be balanced dynamically.
–
Align the balancer, BMW No. 36 3 600, with
knurled screws (2)/level gauge (1).
•
Attach mounting fixture, BMW No. 36 3 618, to
the centering-collar side of the rear wheel.
•
Pass the balancing shaft, BMW No. 36 3 607,
through the rear wheel.
•
Screw the balancing shaft up handtight with
knurled nut, BMW No. 36 3 619.
•
Place the rear wheel on the balancer,
BMW No. 36 3 600.
•
Rotate the rear wheel and allow it to come to a
halt.
•
Clean the attachment points for the adhesive
weights.
e
The maximum balancing weight is 60 g!
•
Attach the adhesive balance weights, equally
distributed between the left and right sides of the
wheel rim, opposite the heaviest point on the
wheel.
•
Repeat the balancing procedure as a check.
36 3 621
36 3 622
36 3 607
36 3 619
1
2
Static balancing of rear wheel
Note:
Important:
KR360040
36.9