2
1
Aligning rubber mounts
23 00
Aligning left-hand rubber mount
23 00
e
Important:
The alignment of the left-hand rubber mounts rela-
tive to the frame is preset at the factory.
Do not slacken the paint-marked Torx screws (1)
unless the rubber mount has to be replaced.
23.28
3
–
Prepare a template as shown in the illustration
above.
•
Insert template (2) between left/right bearing
mounts and press against machined face (arrow)
on right.
•
Slide left bearing bushing into its mount.
•
Lightly press bearing bushing against template
and uniformly tighten screws (1).
KL230050
KL230060