Removing/installing rear left foot-
46 71
rest holder
•
Unscrew nut for battery holder.
•
Take out screws (arrows) and remove footrest
holder (1).
•
Remove footrest.
L
Note:
Note presence of ball and spring; when installing,
grease footrest pin with Shell Retinax EP 2.
•
Remove footrest pad from footrest.
•
Remove guide cap.
e
Important:
The guide cap (case mounting) is secured to the
footrest holder with self-tapping screws. Insert
screws with Loctite 2701.
•
Installation is the reverse of the removal proce-
dure.
Lubricant:
.................................................. Shell Retinax EP 2
X
Tightening torque:
Footrest holder, rear, to frame...................... 21 Nm
Battery carrier, left, to footrest holder ........... 18 Nm
46 71
footrest holder
1
KR460300
•
Remove the retaining plate for the brake lines (ar-
row) at the footrest holder.
•
Take out the screws and remove the footrest
holder.
•
Remove footrest.
L
Note presence of ball and spring; when installing,
grease footrest pin with Shell Retinax EP 2.
•
Remove footrest pad from footrest.
•
Remove guide cap.
e
The guide cap (case mounting) is secured to the
footrest holder with self-tapping screws. Insert
screws with Loctite 2701.
•
Installation is the reverse of the removal proce-
dure.
Lubricant:
.................................................. Shell Retinax EP 2
X
Footrest holder, rear, to frame...................... 21 Nm
Removing/installing rear right
Note:
Important:
Tightening torque:
KR460330
46.23