Table of Contents
Advertisement
4. With the filter in place, insert the bottom tabs of the filter door into the corresponding slots. Close
the filter door and secure with the two screws removed in Step 2.
4.5
LENS REPLACEMENT PROCEDURE
A variety of primary lenses can accommodate different throw distances and specific types of
installations.
1. Release the lens locking lever (UP position).
2. Pull out lens and replace with a different high-contrast primary lens, as described in
Assembly and Connection of
3. Secure with lens locking lever (down position).
CP2000 Setup Guide
020-100070-01 Rev. 1 (10/08)
F
4-3 A
F
R
IGURE
IR
ILTER
Components.
EPLACEMENT
Section 4: Maintenance
2.1
4-11
Hide quick links:
Advertisement
Table of Contents
